Jam Pack(Expo)ed Day

Today was the really big day for our trip to the Pack Expo. We presented our robot, explored the show floor, visited sponsors, and squeaked in a little tourist activities.

We got up early and had Dunkin Donuts for breakfast. We did not know the valet parking rules so it took a while to get the van. However, it was in perfect shape so there were not complaints. The Pack Expo is held at McCormick Place, an incredibly large convention center in Chicago. It was a short, mildy stressful drive.

Immediately after arriving, we unloaded and set up our presenting area. Check out the video here. The FIRST Robotics area was inside the PMMI Education booth. We were surrounded by college booths. It was really exciting getting everything up and running and looking great. Bydlon set up the power point on the computer and the videos on the tablet. Bryce, Tyler and Brandon got the mascot out and made sure Murphy was up and running again. Everything started out fantastic.

But, as usual with Team 3313, Murphy's Law struck. The gearbox we put on the shooter had gears made out of Aluminum. The problem with aluminum is that it can be kind of soft when used at high speeds and a lot of torque. Of course the shooter wheel spins at incredibly high speeds and has a lot of torque. Basically, the gears rubbed down to nothing. This led to Bryce, Brandon, and Tyler having to do a complete shooter wheel motor change while presenting. OF COURSE, this happened right when the Pack Expo news team came over to interview us and film some video. However, the team always perseveres. The guys worked hard and fast and got the job done. The change over was seamless. Plus, it was a major upgrade for shooting.

After presenting, lunch was served in an office overlooking the entire show floor. It was incredible. The team who took over the presenting area was Team 864 Sparky from Richmond, VA. They were really nice and had some interesting ideas for designing their robot. Absolutely, a highlight of the trip was talking to other FRC teams. Learning their methods and practices can teach us a lot. They were very friendly and very knowledgeable 

A former PMMI President took the four of us on a tour of show floor. The Pack Expo had over 1900 exhibitors. That's A LOT of booths... One favorite was Fanuc. They make the yellow robotic arms. They had one arm that could take a picture of random objects in a bin and find a flat surface and grab it. Another favorite booth was where we got wrapped up in shrink wrap. We stood next to a palette and got wrapped up by a machine. Check out the video here.

We spent the last few hours of the Pack Expo visiting our sponsors. We stopped by the Douglas booth. We spent at least an hour at the Massman booth. The engineers were very nice. Highlight of the trip for Bydlon was watching the engineers talk to the students about how awesome their job is. Our last stop was the Aagard booth where we talked to an electrical engineer, Brad V., for about an hour. It was nice of Brad to spend that much time talking to students.

To end the EXTREMELY long day, Bydlon went for a walk to see The Bean in Chicago. The guys went to the swimming pool and hot tub to relax. A crazy, informative, awesome day really takes the energy out of people.

Loving Chicago

Brandon, Bryce, Tyler, and Bydlon left for Chicago today to attend and present at Pack Expo 2012. Today was really the "tourist" day while Monday will be a big "work" day.


The four travelers met up at JHS to pack up the van at 5:30am. It was an early start but led to more time exploring later on in the day. It was a tight squeeze, but all of the stuff some how fit into the back of the van. The drive was very uneventful. Great weather, easy roads to drive, not too bad of construction. The 8 to 9 hours passed by very quickly given the circumstances.

It took a little bit of work but we found our way to the hotel. IT IS SO NICE. WOW. Big thank you to PMMI and Massman Automation Designs for setting up our stay and PackExpo tickets. This is for sure the nicest hotel any of us have stayed at. Everyone rested for a little bit before going out to do tourist activities.

Our original plan was to take the Elevated Train to the Willis (formerly Sears) Tower. Unfortunately, we couldn't figure out how to get a ticket for the train so we walked. The Willis Tower is amazing. We took an elevator to the top and even went out on The Ledge. The Ledge are some clear boxes that jut out of the top of the tower. It makes you feel like you are floating 103 stories in the air. Chicago looked amazing at night.

Then we ate some Chicago Style Pizza at Giordano's. It was incredibly delicious, especially after a long day of either sitting in the car or walking all over Chicago.

Tomorrow is the big day! We will present about FIRST Robotics and our team from 9am to 1pm in the Lakeside Center. We cannot wait!

Packing for the Pack Expo

The team met again today. Our main goals for today were getting the tool boxes ready for our trip to Chicago, getting Murphy also set to travel, and working on some press items.

Bryce, Brandon, Tyler, and Bydlon are taking a very short trip to the Pack Expo in Chicago on Sunday, Monday, and Tuesday. The Pack Expo is a very large convention at McCormick Place for packing manufacturing companies. Alexandria, MN has a wealth of packing machine manufacturing companies (including the PMMC, one of our biggest local sponsors). Due to their generosity, those 4 team members are being provided a van, gas money, hotel rooms, and a presentation booth for Monday. We are SO EXCITED to be able to share the values of FIRST, the evolution of our team, and the fantastic sponsors we have with the over 100,000 attendees of the Pack Expo.

In preparation for this awesome event, we did a lot of work today. Bydlon picked up the van from Massman (THANK YOU!) that will be driven down. Demian and Alex mounted a cylinder on Murphy just so we could demonstrate our ability to use pneumatics. Miranda and Alicia rewired some of the shooter and conveyor components so we had more shooter power. This was a big process because spike relays are really annoying and hard to get to work. We ended up using a Jag instead. Bryce did a total makeover organization of the toolbox so we bring the right amount of tools and supplies if (when) something goes wrong. Brandon helped with that and continued thinking about a bridge lowerer. Allen tested all the code and made sure we were all set to go at Pack Expo. He also uploaded the next Java Tutorial. At the end of the day, Brandon and Bryce took off the ears and shooter of Murphy so we can fit it into the van.

While all that robot work was going on, up in the computer lab, a lot of work was going on. Kacy worked on a press release about our fundraising experiences last Saturday. Carson made a new banner for this website using our new color scheme and revised logo. It looks great! Taylor and Hadley worked on thank you cards for Elden's and 3M. Tyler started working on making plans for a wooden practice field. This is a HUGE project that will take us all of November to complete.

So it was a big day for the team preparing and working but A LOT was accomplished. Great work! Pack Expo will be so much fun!

Keep your eyes on our Twitter, Facebook, YouTube, and this blog for updates from Chicago!!